Lenze EPM-H502 - Calling up Information Messages

Operation
Calling up information messages
6

80
EDBPM−H502 DE/EN/FR 5.1
6.3 Calling up information messages
ƒ Information messages
– are texts which appear because of a certain event (e.g. if an actual value
exceeds a limit),
– can only be called up as long as the triggering event is active.
– must be programmed in the »HMI Designer« planning tool,
– can be up to 5 lines × 30 characters long (normal character size).
ƒ The second to last line contains a programmable message field. This field
indicates the numerical value of the variable that has activated the
message.
ƒ The last line shows the date and time when the message has been
triggered.
ƒ signals that an information message is present.
Symbols and characters in the information messages
Symbols and characters used in
the date/time line
Meaning
* The information message has been called up for the first time
HELP Help is assigned to the information message. ( 83)
You want to ... Touch the fields ... Example
A call up an information message.
l A page can display up to
2 information messages.
ESC
Temperature exceeds
safety limit
1700
13-09-2000 10:55a HELP
125.5
13-09-2000 10:45a HELP
Pressure exceeds
safety limit
B select the next information messages. or
ESC
Water level below
working threshold
-10
13-09-2000 11:00a HELP
C close the information messages.
ESC