Lenze EPM-H502 - Page 82

Operation
Calling up alarm messages
6

82
EDBPM−H502 DE/EN/FR 5.1
You want to ... Touch the fields ... Example
A call up an alarm message.
ESC
HIST
Tank pressure exceeds
safety limit
150.0
>13-09-2000 10:45a HELP
Water level below
processor limit
10
>13-09-2000 10:45a
<13-09-2000 10:55a HELP
0032
0001
B select other alarm messages.
or
ESC
HIST
Temperature exceeds
safety limit
1600
>13-09-2000 12:25p
#13-09-2000 12:30p HELP
0006
C
select the alarm register for an alarm
message.
l The alarm register logs all alarms
chronologically, with time and date
stamping.
l If "H" is displayed in the left column,
an alarm register has been selected.
HIST
ESC
Tank pressure exceeds
safety limit
150.0
>13-09-2000 10:45a
<13-09-2000 10:48a
#13-09-2000 10:55a
Water level below
processor limit
10
>13-09-2000 10:45a
<13-09-2000 10:50a
#13-09-2000 10:53a
H
0001
H
0032
l Close the alarm register and go back
to the alarm message.
ESC
D close the alarm messages.
ESC
 Note!
ƒ If the alarm register buffer is full, no more alarms are saved.
ƒ Use the »HMI Designer« to define commands for acknowledging
all alarms or clearing the buffer of the alarm register.