Lenze i550

Engineering Tools
2 | P a g e L e n z e i 5 5 0 A c t u a t o r S p e e d A O I
Disclaimer
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
NOTE:
Software, Technical Information and Product Documentation supplied or described in and or part of
this document is provided free of charge, and without warrantee, or guarantee of fitness.
Any risks, or failures resulting from its quality, or use, remain the responsibility of the user at all times.
The user must provide all safety measures protecting against possible mal operation, and assumes
all risk of use.
Lenze does not take any liability for direct or indirect damage, e. g. profit loss, order loss or any loss
regarding business.
Efforts have been made to be accurate; the information contained herein does not purport to cover
all details or variations in hardware or software, nor to provide for every possible contingency in
connection with installation, operation, or maintenance. Features may be described herein which
are not present in all hardware and software systems. Lenze assumes no obligation of notice to
holders of this document with respect to changes subsequently made.
Lenze makes no representation or warranty, expressed, implied, or statutory with respect to, and
assumes no responsibility for the accuracy, completeness, sufficiency, or usefulness of the
information contained herein. No warranties of merchantability or fitness for purpose shall apply.
All Software trademark’s, copyright, and features are that of the software originator, Lenze extends
no warrantee over 3
rd
party software by the creation of documentation that references it.