Lenze i550

Engineering Tools
3 | P a g e L e n z e i 5 5 0 A c t u a t o r S p e e d A O I
About this Documentation
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
This document describes the Add-On Instruction (AOI) i550_ActuatorSpeed, which is intended to be
used within RSLogix 5000 to allow control of a Lenze i550 drive using EtherNet/IP communication.
It covers the installation, integration, and use of the i550_ActuatorSpeed AOI. This includes required
drive settings, installing the i550 Device Description (EDS) and AOI file into RSLogix 5000,
implementing the AOI in a project, and controlling the drive with the AOI. The document was written
for use with the following software versions:
Software
From version
Lenze >>Easy Starter<<
V 1.16
Allen Bradley >>RSLogix 5000<<
20.01
Allen Bradley >>RSLinx Classic<<
----------
AOI file
V 3.0
EDS file
Lenze_IOFW51AGXX_V1-20181107.eds
Document History:
Version
Notes
Author
Date
Beta
Beta Initial Release
Spadarzewski, R
01/01/17
V1.0
Revision of Initial Release
Spadarzewski, R
Straus, C
02/13/17
V1.1
Update for Issues seen with new EDS files
Bingham, D
11/08/18
V1.2
Addition of new sections and change of AOI name
Ball,D
8/12/2019