EasyManua.ls Logo

LEVC VN5 2021 - Warranty and Type Approval

Default Icon
85 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
General Information
1
S023074 PA1
2020-05-12
5
Warranty on LEVC Vehicles
Contact The National Sales Company in the country where the vehicle will be registered for
details of the terms of any applicable LEVC warranty.
The Converter should warrant its design, materials and construction for a period at least equal
to any applicable LEVC warranty.
The Converter must ensure that any alteration made to a vehicle or component does not reduce
the safety, function, or durability of the vehicle or any component.
The Converter shall be solely responsible for any damage resulting from any alteration made by
the Converter or any of its agents to a LEVC Vehicle component.
The Converter releases LEVC from all claims by any third party for any cost or loss (including
any consequential damages) arising from work performed by a Converter unless LEVC has
given its prior written consent to such liability.
Whole Vehicle Type Approval
The objective of the 2007/46/EC Whole Vehicle Type Approval (WVTA) legislation or applicable
local legislation is to ensure that new vehicles, components and separate technical units put on
the market provide a high level of safety and environmental protection. This will help to ensure
that all vehicles are not damaged by the fitting or converting of certain parts or equipment, after
they have been placed on the market or entered service.
Converters are advised to check if the installation of additional parts require either Type
Approval or Individual Vehicle Approval before the vehicle is registered.
Type Approval requires a Conformity of Production (CoP) inspection to be carried out at the
conversion location to demonstrate that all vehicles of the same type will conform to the type
approved specification.
IVA requires inspection of an individual vehicle to establish compliance.
NOTE
Factory fitted LEVC parts are covered by the Certificate of Conformity (CoC)
Legal and Vehicle Type Approval
All components embodied on LEVC vehicles are approved to the applicable legal requirements.
LEVC vehicles have Type Approval for the intended marketing territories.
LEVC vehicles have Type Approval for many territories, although the vehicles shown in this
manual are not necessarily released in all territories.
NOTE
For additional information or technical support contact Aftersales@LEVC.com.

Related product manuals