LevelOne FCS-3403 - Maintenance; Rebooting the Camera; Restoring Default Settings

User Manual of Network Camera
155
Figure 11-11 Device Information
11.7 Maintenance
11.7.1 Rebooting the Camera
Steps:
1. Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or Configuration > Advanced Configuration> System > Maintenance:
2. Click Reboot to reboot the network camera.
Figure 11-12 Reboot the Device
11.7.2 Restoring Default Settings
Steps:
1. Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or Configuration > Advanced Configuration> System > Maintenance
2. Click Restore or Default to restore the default settings.