LevelOne WAP-6011 - Using WPA-PSK;WPA2-PSK

PC and Server Configuration
31
Using WPA-PSK/WPA2-PSK
For each of the following items, each Wireless Station must have the same settings as the
Wireless Access Point.
Mode
On each PC, the mode must be set to Infrastructure.
SSID (ESSID)
This must match the value used on the Wireless Access Point.
The default value is wireless
Note! The SSID is case sensitive.
Wireless
Security
On each client, Wireless security must be set to WPA-PSK.
 The Pre-shared Key entered on the Access Point must also be
entered on each Wireless client.
 The Encryption method (e.g. TKIP, AES) must be set to match the
Access Point.