Leviton Cat 6A - 3.2.2 - Plenum Cabling Systems for WAPs

Wireless Access Points — Plenum Cabling Systems for WAPs
Many wireless access points are installed in drop ceilings, which means the cabling
system may require a plenum rating to meet requirements for flammability and smoke
density in air-handling spaces. Leviton oers a complete plenum-rated in-ceiling system
which includes patch cords, cable, Atlas-X1
™
connectors, QuickPort
®
surface-mount
boxes and In-Ceiling Mounting Brackets.
The QuickPort in-ceiling mounting bracket provides a fixed location for terminating
the data connector. This reduces the possibility of damage during construction.
Contractors can perform the initial installation and permanent link testing, while
allowing the flexibility to move the In-Ceiling Bracket to refine Wi-Fi
®
coverage
or WAN placement without needing to retest the link.
Plenum-Rated Patch CordsPlenum-Rated Cables
Wireless Access Point (WAP)QuickPort In-Ceiling Bracket with Plenum-Rated
Surface-Mount Box, Attached to Drop Wire*
* = Drop-wire not included in QuickPort In-Ceiling System and installed independent of ceiling grid suspension.
Leviton Network Solutions
|
(800) 722 2082
|
+1 (425) 486 2222
|
leviton.com/ns 39
Applications >
Plenum Cabling Systems for WAPs
Wireless Access Points >
Testing
Product
Overview
Termination
Cat 6A
Applications Applications
Glossary and
References
Installation