In-Ceiling and In-Wall Brackets
QUICKPORT IN-CEILING BRACKET OPTIONS
DESCRIPTION
Includes clip for drop wire/rod
mounting
49223-CBC
No clip 49223-CB0
QuickPort
®
In-Ceiling Bracket
This bracket provides a fixed location for terminating a data connector, creating a more
reliable connection than a direct connect plug. It also reduces potential damage during
construction. Contractors can perform the initial installation and permanent link testing
and have the flexibility to move the bracket to refine Wi-Fi
®
coverage or WAN placement
without needing to retest the link.
Wireless Access Point Kit
The QuickPort WAP Kit combines all the pieces necessary to install a
testable permanent link for cabling that terminates in plenum spaces.
The kit is ideal for Ethernet-enabled devices that mount on or above
ceiling tiles, such as WAPs and cameras. It protects installed cabling
by providing a stable and reliable termination point.
QuickPort In-Wall Bracket
This bracket creates a testable permanent link for cabling that terminates in the wall
without using a traditional wallplate. It is ideal for Ethernet devices that mount to electrical/
low-voltage boxes or directly to the wall, such as WAPs, cameras, or clocks. The bracket
provides a stable mounting surface for a connector that is recessed behind the wall.
QUICKPORT IN-WALL BRACKET OPTIONS
DESCRIPTION
Set of 5 49223-BA5
Kit; includes bracket and single-gang
wallplate mounting bracket
49223-BAK
WIRELESS ACCESS POINT KIT
DESCRIPTION
QuickPort WAP Kit, includes In-Ceiling Bracket (49223-CBC),
2 Cat 6A connectors (6AUJK-RW6), Surface-Mount Box
(4S089-2WP), 2 Cat 6A patch cords (AXPPP-10W)
49223-W10
QuickPort WAP Kit, includes In-Ceiling Bracket (49223-CBC),
Cat 6A connector (6AUJK-RW6), Surface-Mount Box
(4S089-2WP), Cat 6A patch cord (AXPPP-10W)
49223-W1C
Leviton Network Solutions
|
(800) 722 2082
|
+1 (425) 486 2222
|
leviton.com/ns 64
In-Ceiling and In-Wall Brackets
Wallplates and Housings >
To Next Page
Loading...
