User Manual for BPS-4H (High Temp.)
www.levitronix.com
PL-2009-03, Rev04, DCO# 21-101
Do not under any circumstances open the controller or motor. Levitronix
®
does
not assume responsibility for any damage, which occurs under such
circumstances.
High magnetic field strength of pump impeller.
The pump system contains a rotor magnet with high field strength. This may alter
or damage the calibration of sensitive electronic devices and measuring
instruments in the immediate surroundings. Keep at a safe distance from the
rotor, computers, monitors and all magnetic data storage media (e.g. disks,
credit cards, audio, video tapes etc.)
Usage of motor cooling loop.
Specifically, when pumping liquids at temperatures higher than 90°C the water
cooling loop of the motor has to be active even if the pump is not running or
powered off, otherwise components inside the motor might be destroyed. For
example, after an emergency stop or power failure, it has to be assured that
water cooling is still active until the hot liquid in the pump has cooled down.
Hazardous voltage may be present.
The controller must be grounded and placed in a spill protected environment. Do
not under any circumstances open the powered controller.
High magnetic field strength of pump impeller.
The pump system contains a rotor magnet with high field strength. Pacemaker
may be influenced and magnetic forces may lead to contusions. Keep distance
to pacemakers and handle impeller with care.
TOXIC CHEMICALS may be present.
When using the system to pump chemicals, skin contact and toxic gases may
be hazardous to your health. Wear safety gloves and other appropriate safety
equipment.
For double safety it is required to place the pump head with the motor in a
contained enclosure.
Do not miss-match the power extension cables for connection of the motor to
the controller of the BPS-4 pump
®
2000 as
this may destroy the controller. The BPS-4 power extension cables are
-PuraLev
®
2000 -
.
To Next Page
Loading...
Need help?
General
