11
EN
Auto Mode
Timer
Automatic Shutoff
Memory Function
Auto Mode uses the dust sensor inside
the air purifier to adjust the fan speed
automatically based on air quality. For
example, if the air quality is bad, the fan will
automatically be set to high speed.
• Press to turn Auto Mode on/o.
• Pressing or will also exit Auto
Mode.
You can set a timer between 1–12 hours.
• Press repeatedly to choose a time
in increments of 1 hour. When you stop
pressing , the display will flash 3 times
and the timer will start.
• The air purifier will automatically power o
once the timer is finished.
• To cancel a timer, press repeatedly
until the display reads “-:--” and flashes
3 times.
As a safety feature, the air purifier will
automatically turn o if the back cover is
removed.
When the air purifier is plugged in, it will
remember its programmed settings while
turned o, and resume those settings when
turned back on.
Auto Mode Chart
Colour Air Quality Fan Speed
Bad High
Moderate Medium
Good Low
Very Good Sleep Mode
USING YOUR AIR PURIFIER (CONT.)
To Next Page
Loading...
Need help?
General
