10
1. Turn o and unplug the air filter, then remove the filter cover.
[Figure 4.1]
Replacing the Air Filter
2. Remove the old air filter and properly dispose of it.
[Figure 4.2]
3. (Optional) Clean any remaining dust and dirt from inside the
housing using a vacuum hose. [Figure 4.3]
4. Unwrap the new air filter and place it into the housing. Make
sure the black pull tabs are facing out. [Figure 4.4]
Figure 4.1
Figure 4.2
Figure 4.4
Figure 4.3
black tabs
facing out
unplug
air purifier
5. Replace the back cover onto the housing. [Figure 4.5]
6. Plug in and turn on the air purifier. Then press and hold for
3 seconds (see Resetting the Air Purifier, page 11).
NOTE:
• Do not clean the filter with water or other liquid.
• The back cover must be properly secured to the unit in order for it to
power on.
Figure 4.5
To Next Page
Loading...
