Levoit LV-H135 User Manual

16
TROUBLESHOOTING
Problem Possible Solution
Air purifier will not turn on or
respond to button controls.
Plug in the air purifier.
Check to see if the power cord is damaged. If it is, stop
using the air purifier and contact Customer Support (see
page 19).
Securely close the filter cover so that the safety switch is
activated (see page 7).
Plug the air purifier into a dierent outlet.
Air purifier is malfunctioning. Contact Customer Support
(see page 19).
Air purifier makes an unusual
noise while the fan is on.
Make sure the filter is removed from its packaging and
properly in place (see page 6).
Replace the filter (see page 14).
Air purifier may be damaged, or a foreign object may be
inside. Stop using the air purifier and contact Customer
Support (see page 19). Do not try to repair the air purifier.
Airflow is significantly
reduced.
Make sure the filter is properly in place with plastic
packaging removed (see page 6).
Press to increase the fan speed.
Make sure there is clearance of at least 15 in / 38 cm on
all sides of the air purifier.
The pre-filter may be clogged by large particles, such as
hair or lint, blocking airflow. Clean the pre-filter
(see page 12).
Replace the filter (see page 14).

Levoit LV-H135 Specifications

General

Particle filtration	0.3 µm
Filtering capability	Cigarette smoke, Fine dust, Pollen
Number of filter stages	3
Efficiency	99.97 %
Noise level	54 dB
Certification	CARB, FCC, ETL
Air purify rate	360 m³/h
Number of speeds	-
Noise level (low speed)	26 dB
Operating temperature (T-T)	-10 - 40 °C
Suitable for room area up to	43 m²
Operating relative humidity (H-H)	0 - 85 %
AC input voltage	120 V
AC input frequency	60 Hz
Power consumption (max)	40 W
Power consumption (standby)	0.8 W
Control type	Touch
Display type	LED
Product color	Black, White