Levoit LV-H135 User Manual

8
USING YOUR AIR PURIFIER
General Operation Sleep Mode
Timer
Memory Function
Automatic Shutoff
Auto Mode
1. Plug in and press to turn the
air purifier on/o. The fan will start
automatically.
2. Optionally, press to change the fan
speed. You can also select Auto Mode
or Sleep Mode, or select a timer.
Auto Mode uses the dust sensor inside
the air purifier to adjust the fan speed
automatically based on air quality. For
example, if the air quality is bad, the fan will
automatically be set to high speed.
The air purifier will remember its
programmed settings when turned o, and
will resume these settings when turned
back on.
As a safety feature, the air purifier will
automatically turn o if the filter cover is
removed.
Sleep Mode uses the lowest possible fan
speed to create a quiet environment.
• Press to turn Auto Mode on/o.
• Pressing or will also exit Auto
Mode.
• Press to turn Sleep Mode on/o.
• Pressing or will also exit Sleep
Mode.
• You can set a timer for 2, 4, or 8 hours.
• Press to cycle through timer options
and turn the timer o. The timer will start
automatically.
• Once the timer has finished, the air
purifier will turn o.
Note:
• You can change the fan speed at any time
while the timer is on. The timer will work with
any mode.
• The timer will restart if the time is changed.
• Pressing or unplugging the air purifier will
cancel the timer.
Note: The air purifier will not remember timers.
Note:
• For best results, or to address a
specific air quality issue such as
smoke, run the air purifier at high
speed for 15–20 minutes before
using a lower speed or Auto Mode.
• To eectively clean air, keep
windows and doors closed while the
air purifier is operating.

Levoit LV-H135 Specifications

General

Particle filtration	0.3 µm
Filtering capability	Cigarette smoke, Fine dust, Pollen
Number of filter stages	3
Efficiency	99.97 %
Noise level	54 dB
Certification	CARB, FCC, ETL
Air purify rate	360 m³/h
Number of speeds	-
Noise level (low speed)	26 dB
Operating temperature (T-T)	-10 - 40 °C
Suitable for room area up to	43 m²
Operating relative humidity (H-H)	0 - 85 %
AC input voltage	120 V
AC input frequency	60 Hz
Power consumption (max)	40 W
Power consumption (standby)	0.8 W
Control type	Touch
Display type	LED
Product color	Black, White