Lexicon LXP-15 - MIDI Control Types

Lexicon
LXP-15 Owner's Manual
4-10
Slider Sources correspond to some type of slider, pedal or wheel on the MIDI
instrument. The output is determined by the physical position of the slider or
wheel. Most sliders and wheels are implemented as unidirectional controllers.
“Off” or “no change” corresponds to the minimum position. Pitch Bend, Pan and
Balance are implemented as bidirectional controllers. “Off” or “no change”
corresponds to the middle position of the control.
MIDI Sliders
MIDI SLIDERS
SLIDER WHEEL
0
PEDAL
127
0
127
0
127
MIDI Switches
The Switch Sources correspond to foot switches or front panel switches on the
MIDI instrument. Switches generate 0 when the corresponding control is “off”
and 127 when it is “on”.
SWITCHES
OFF = 0 ON = 127
UP = 0 DOWN = 127