Lexicon LXP-15 User Manual

Lexicon
LXP-15 Owner's Manual
4-20
The General Purpose patching system allows you to customize the response of
each LXP-15 setup to your requirements. Here are some tips and techniques for
getting the most from General Purpose patches.
• Fine tune the parameters on the Delay, Pitch/EQ, Reverb, Level, and Mod
pages before creating any General Purpose patches for the setup.
• Don’t assign Size to performance Sources like velocity, note number, etc.
Changing Size temporarily mutes the outputs of the LXP-15.
• During performance, always set the Update mode on the Sys page to “Off”
for optimum response time.
• Assigning the LFO Source to multiple Destinations may cause the response
time of the LXP-15 to slow down.
• Controlling the LFO Rat Destination will not produce any audible effect unless
LFO Rat is first patched to control some other Destination.(See presets 53-
65 for LFO patching.)
Tips for Using
General Purpose Patches

Lexicon LXP-15 Specifications

General

Brand	Lexicon
Model	LXP-15
Category	Recording Equipment
Language	English