Importing software clients to a software client group
Software clients can be imported from a from an XML, TXT, or CSV file.
1 Click the Software Client Groups tab.
2 Select a software client group from the Software Client Groups list.
3 Select Client Profiles from the Tasks list.
4 Click Import.
5 Type the path of the file, or click Browse, and then locate the file.
6 Click Upload.
The entries in the file are added to the list of software clients.
In a CSV and TXT file, each line must contain a single IP address of a software client. An XML file is structured like the
following example:
<?xml version="1.0" encoding="UTF‑8" ?>
<filters>
<filter>
<address>10.10.2.200</address>
</filter>
<filter>
<address>10.10.2.150</address>
</filter>
</filters>
Assigning solutions to a software client group
Assigning a solution to a software client group grants the software clients in the group access to the solution on the
server, which allows users of these software clients to execute jobs using the solution.
1 Click the Software Client Groups tab.
2 Select a software client group from the Software Client Groups list.
3 Select Solutions from the Tasks list.
4 In the main section, click Add.
5 Select the solution from the list, and then click Next.
6 Configure the local settings of the solution for the current software client group, and then click Finish.
Installing client software
Do the following on a client computer or print server:
1 From the LDD installation package, run Setup.exe.
2 Click Install Enterprise System > Install Client Software.
3 Click Agree to accept the license agreement.
4 Make sure Client Software is selected and highlighted. If necessary, specify a location for the installation.
Managing software clients 112
To Next Page
Loading...
