Component Port Protocol Function
Printer 79 TCP Finger
161 UDP SNMP, device discovery
5000 TCP Policy updates, ObjectStore plain text communication
5353 UDP Multicast DNS
6000 UDP Device discovery, ObjectStore communication using XML protocol
6100 UDP Device discovery, policy updates, Lexmark Secure Transport (LST) encrypted data
6110 TCP Device discovery, policy updates, LST authentication and negotiation
9100 TCP Printing, policy updates
9300 UDP Device discovery, NPA protocol UDP communications
9500 TCP NPA protocol TCP communications
Software clients 9780 TCP Profile submission
9788 TCP Profile submission
Activating LDD licenses
Notes:
• If your Lexmark reseller has provided you with license files, then save them in a folder accessible to the server,
skip the following procedure, and then continue with the server installation using the provided license files.
• If your Lexmark reseller manages your licenses, then you may not be provided with an entitlement ID. Contact
your reseller to obtain the proper licenses.
• When using a failover cluster for the load balancer, a complete set of licenses (including a server license, printer
licenses for all printers, a client license if applicable, and e‑forms virtual printer licenses if applicable) must be
activated for the host ID of each node in the cluster and made available on the shared drive.
• Before installing the LDD load balancer, the appropriate licenses must be activated. Activation associates the
server license, each printer license, and, if applicable, a client license with the physical address of the load
balancer in the LDD system and generates license files that will only work with that system.
1 On the computer where you want to install the load balancer or workgroup system, click Activate and Download
License File(s) in the installation window.
2 Enter the entitlement ID provided with the server software package.
3 Copy the host ID displayed on the installation window.
Notes:
• The host ID is the physical address (MAC address) of the network adapter in the server, without hyphens or
other punctuation.
• If multiple network adapters are present, then a list of host IDs are shown. Any listed host ID is appropriate
as long as the associated network adapter remains in the server. However, using the host ID associated with
the network adapter connected to the same network as your LDD system may help avoid future confusion.
For more information, see “Finding the host ID” on page 68.
4 Click Launch Lexmark Licensing Portal.
Installing Lexmark Document Distributor 22
To Next Page
Loading...
