– Printer models
– Profiles
– User for each profile
– LDD servers
– User for each printer
– Software client for each profile
– User for each software client
– Tasks
– Printer for each profile
– Scheduled scripts
• User Report—This displays data related to users, such as user job success rates, most active users, and job duration.
Adding a report
Note: Only summary reports are supported. Even if a custom report has a detail section defined, the section will not
be displayed. If a custom report does not have a summary section, then any reports generated from the custom
report will be blank.
1 Click the System tab.
2 Click Reports in the System list.
3 Upload the report files:
a Click Upload Report Files > Browse.
b Select a .jasper compiled report file, as well as any of the following:
• .jasper compiled report files used as subreports
• .jpg or .png graphics included in the report
• .jrxml report source files (optional)
c Click Open.
d Existing files are overwritten by default. If you do not want to overwrite existing files, then clear the Overwrite
if file already exists check box.
e Click Upload.
Selected files are copied to the folder \Lexmark\Solutions\apps\wf-ldss\WEB-INF\reports\ where LDD is
installed on each server.
4 Below the Available Reports list, click Add.
5 Type a descriptive report name.
6 Select the Jasper report file name for the compiled report you uploaded.
7 Select the database the report was designed to access from the Datasource drop‑down menu. Commonly used
databases include:
• MONITOR—This is used by reports that access the jobs list and the log.
• SOLUTIONINFO—This is used by some solutions to store custom data.
For more information about a custom report, contact the designer of your custom report.
Monitoring and maintaining the system 82
To Next Page
Loading...
