Viewing the Embedded Solutions Diagnostic Log
All activity for LDD solutions and eSF applications is recorded in the Embedded Solutions Diagnostic Log on each printer.
1 In the address field of your Web browser, type http://printer
‑
IP/se, where printer
‑
IP is the printer IP
address or host name.
2 Click Embedded Solutions > Log File.
By default, debugging messages are not recorded. When troubleshooting a problem, you can enable debugging entries
in the log to capture all available messages:
1 In the address field of your Web browser, type http://printer
‑
IP/se, where printer
‑
IP is the printer IP
address or host name.
2 Click Embedded Solutions > Set Logging Level > Set Logging Level > Yes > Submit.
Note: After recording the necessary data, you must change the logging level back to Default to avoid excessive log
entries.
Viewing logs 123
To Next Page
Loading...
