Creating a device group from an existing device group
1 Click the Device Groups tab.
2 Under the Device Groups list, click Add.
3 Type a unique name for the new device group.
4 Select the existing group to copy, and then click Add.
The following settings are copied from the existing device group to the new device group:
• Solution associations
• Solution settings
• eSF application associations
• eSF application settings
• Home screen configurations
• Fax forwarding configurations
• Security settings
Configuring timeout for policy updates
The timeout setting for the PolicyUpdate service determines how long the system waits for a printer to respond after
it is initially connected during a policy update.
Note: If a large eSF application or several eSF applications are included with a hybrid solution, then you may need to
increase the default timeout for policy updates in order to allow enough time for policy updates that include eSF
application deployments to complete.
1 Click the Services tab.
2 Select PolicyUpdate from the Services list.
3 If necessary, select Parameters from the Tasks list.
4 Type a timeout period in seconds for each device during a policy update.
5 Click Apply.
Creating a new discovery profile
1 Click the Device Groups tab.
2 Select a device group from the Device Groups list.
3 Select Discovery Profiles from the Tasks list.
4 Type the IP address, address range, subnet, host name, or fully qualified domain name in the Address field.
Address format Example
IP address
10.10.2.100
IP address range
10.10.2.1‑10.10.2.127
Subnet
10.10.2.*
Managing device groups and devices 96
To Next Page
Loading...
