6 If you are installing a system to recover a backup, then do the following:
a Select Restore Install (RI).
b Type the path of the folder containing the .ri file from the backup, or click the folder icon and then locate the .ri
file.
7 Specify the folder where you stored the license files during the activation process.
Notes:
• If the license files are located on a network share that requires authentication, then you must supply
authentication before specifying the license location. To authenticate with the remote server, click Start >
Run, type the UNC path to the share (for example, \\myserver\myshare\), and then type the user
name and password when prompted.
• During installation, the license files are copied to the program folder. You can safely move the license files
from the temporary location where you saved them.
8 Specify the solution file that should be installed with the workgroup system.
9 Click Finish > Done.
Installing an enterprise system
Configuration types for enterprise systems
When installing an enterprise system, Lexmark Document Distributor can be installed using the following hardware
configurations:
Configuration Description Advantages Disadvantages
1‑N Database (DB) and load balancer (LB) on one computer, server on one
or more additional computers (most common setup when failover is
not used)
Server(s)
DB
LB
Improved
performance
Increased
hardware needs,
no failover for
database or load
balancer
Installing Lexmark Document Distributor 28
To Next Page
Loading...
