3 The desktop shortcut must be changed to the new address manually:
a On the desktop of the computer where the components are installed, right click the Lexmark Management
Console (LMC) icon, and then click Properties.
b Click Find Target.
c In the folder that appears, right click the shortcut lmc, and then click Properties.
d Change the IP address or host name part of the URL to the new IP address or host name of the local computer.
The complete URL should be http://hostname:9780/lmc/, where hostname is the host name or IP
address of the computer where the components are installed.
Rebooting the LDD system
1 Click the System tab.
2 Set all servers offline. For more information, see “Viewing and changing server status” on page 57.
3 Shut down all server computers.
4 Shut down the load balancer computer(s).
5 Shut down the database computer(s).
6 Boot the database computer(s).
7 Boot the load balancer computer(s).
8 Boot all server computers.
Monitoring and maintaining the system 60
To Next Page
Loading...
