Repairing common server problems
Click Fix to repair several common problems that occur in the LDD system.
The Fix button does each of the following as necessary:
• Set all servers online.
• Run a discovery for the associated device group.
• Update policies on associated printers.
• Reload the license files on the server system.
Printers that are powered off when using the Fix button are placed in the Not Communicating category. To recover
communication with a printer in the Not Communicating category, turn on the printer, and then click Fix again.
Adding printers to a server
Adding a printer using the Solution Status Page adds the printer to the device group associated with the solution and
runs a discovery to initiate communication with the printer. Each printer added uses one of the available licenses on
the server.
1 Make sure the printer(s) being added are turned on.
2 In the right pane of the Solution Status Page, click Add.
Note: The Add button is available only if the server has unused licenses.
Monitoring and maintaining the system 77
To Next Page
Loading...
