• If a user belongs to multiple groups, then group privileges are combined. Privileges can be modified for LDAP
users only. The default administrator has access to all tabs and tasks, and these settings cannot be modified.
1 Select Privileges from the System list.
2 Select a group from the “Group Names from LDAP” list, or add a new group.
To add a group:
a
Click Add, then type the first few characters of the group name, and then click Search.
b Select a group name from the list, and then click Add.
3 Select the tabs and tasks the group is allowed to access and perform.
When assigning privileges, you can select specific tasks under each tab.
4 Click Save Privileges to save settings.
Monitoring and maintaining the system 48
To Next Page
Loading...
