Lexmark E120 - Lexmark E120 Operator Panel Light Sequences

Overview of the Lexmark E120 operator panel
10
Using the operator panels
Understanding the Lexmark E120 operator panel lights
Operator panel lights mean different things, depending on the sequence. Lights that are off, on, and/or blinking indicate
printer conditions such as printer status, intervention, or service.
Use the light sequence table to find the message being indicated, then click the message for more information.
Light sequence
Primary light
sequence
Secondary
light sequence
Message
Ready / Data Error Ready / Data Error
Ready / Power Saver
Busy
Waiting
Cancel job / Reset printer
Flushing buffer
Invalid engine code (Ready / Data light blinks once)
Not ready (Ready / Data light blinks once)
Printing font list or menu settings page
Programming engine code or system code
Restoring factory defaults
Cartridge region mismatch (Ready / Data light blinks four times)
Missing cartridge / Defective cartridge detected (Ready / Data light blinks three
times)
Open door (Ready / Data light blinks once)
Complex page (Ready / Data light blinks three times)
ENA connection lost (Ready / Data light blinks five times)
Insufficient collation area (Ready / Data light blinks three times)
Ready / Data light On=
Ready / Data light Blinking=
Error light On=
Error light Blinking=