Overview of the Lexmark E120n operator panel
28
Using the operator panels
Operator panel codes for the Lexmark E120n
Following are explanations of the primary and secondary light sequences, and what can be done to clear them.
Primary Codes
Ready / Power Saver
Unsupported toner cartridge
Service error
Light sequence:
Ready / Data—On
Message:
• Printer is ready to receive and process data.
• Printer is in Power Saver mode.
Printer is functioning properly.
Note: To change the Power Saver setting, use the Local Printer Setup Utility (see Software and
Documentation CD).
Primary light sequence Secondary light sequence
Message
Continue
Ready / Data
Toner Low/Replace PC Kit
Load / Remove Paper
Paper Jam
Error
Continue
Ready / Data
Toner Low/Replace PC Kit
Load / Remove Paper
Paper Jam
Error
To Next Page
Loading...
