Lexmark E120 - Page 29

Overview of the Lexmark E120n operator panel
29
Using the operator panels
Busy
Resolution reduced
Light sequence:
Ready / Data—Blinking
Message:
Printer is busy receiving and processing data or printing.
Solution:
• Busy:
– Wait for message to clear.
– Press and release to cancel job.
– Press and hold to reset printer.
• Printing:
– Wait for pages to print. The ready light blinks as the pages print. The Ready light is on when printing
stops.
– Press and release to cancel job.
– Press and hold to reset printer.
• Receiving/processing data:
– Wait for message to clear.
– Press and release to stop processing.
– Press and hold to reset printer.
Light sequence:
• Ready / Data—Blinking
• Error—Blinking
Message:
Printer is processing data or printing pages, but the resolution of a page in
current job is reduced from 600 dots per inch (dpi) to 300 dpi to prevent
a memory full error.
Solution:
• Wait until the operator panel returns to Ready to print new job.
• Press and release to cancel job.
• Press and hold to reset printer.