Overview of the Lexmark E120n operator panel
25
Using the operator panels
Overview of the Lexmark E120n operator panel
The printer operator panel has two buttons and six lights (Continue button is both a light and button). Lights indicate the
status of the printer. Buttons are used to continue or cancel the current print job.
When the printer is turned on, all lights cycle as a self test is performed. Also, when the printer is reset, or when a printer
setting is changed in the menus, all lights cycle.
To learn more about the panel lights or to determine the status of the printer when lights are on, see Understanding the
Lexmark E120n operator panel lights.
• Press and release Continue to resume printing.
• Press and release Continue twice quickly to display the secondary light sequence.
• Press and release Cancel to cancel current job.
• Press and hold Cancel until all of the lights come on to reset.
Ready / Data
Toner Low/Replace PC Kit
Load / Remove Paper
Paper Jam
Continue
Cancel
Error
To Next Page
Loading...
