Overview of the Lexmark E120 operator panel
22
Using the operator panels
Jam in Tray 1 / priority feeder
Note: All jams show the same primary code. To determine
the jam location, view the secondary light sequence.
Light sequence:
Error—Blinking
Secondary light sequence:
Press twice quickly to see the secondary light sequence.
• Ready / Data—Blinks four times
• Error—On
Message:
A jam has occurred in Tray 1 / priority feeder.
Solution:
See Clearing jams on page 53 for more information.
Primary light
sequence
Secondary light
sequence
To Next Page
Loading...
