Overview of the Lexmark E120n operator panel
35
Using the operator panels
ENA connection lost
Light sequence:
• Continue—On
• Error—On
Secondary light sequence:
Press twice quickly to see the secondary light
sequence.
• Continue—On
• Paper Jam—Blinking
• Error—On
Message:
During power-on cycle, the printer detected the connection to the external network adapter was lost.
Note: This error is only detected during power-on cycle.
Solution:
• Press to clear message.
• Re-establish connection with the external network adapter.
Primary light
sequence
Secondary light
sequence
To Next Page
Loading...
