Lexmark E120 - Page 39

Overview of the Lexmark E120n operator panel
39
Using the operator panels
Jam at the input sensor
Jam between the input and exit sensors
Note: All jams show the same primary
code. To determine the jam location,
view the secondary light sequence.
Light sequence:
• Continue—On
• Paper Jam—On
Secondary light sequence:
Press twice quickly to see the secondary light
sequence.
• Continue—On
• Ready / Data—On
• Paper Jam—On
Message:
A jam has occurred at the input sensor; it can be after the paper leaves the tray and enters the printer or in the
priority feeder.
Solution:
See Clearing jams on page 53 for more information.
Note: All jams show the same primary
code. To determine the jam location,
view the secondary light sequence.
Light sequence:
• Continue—On
• Paper Jam—On
Secondary light sequence:
Press twice quickly to see the secondary light
sequence.
• Continue—On
• Toner Low/Replace PC Kit—On
• Paper Jam—On
Message:
A jam has occurred and paper is between the printer input and exit sensors.
Solution:
See Clearing jams on page 53 for more information.
Primary light
sequence
Secondary light
sequence
Primary light
sequence
Secondary light
sequence