EasyManua.ls Logo

Lexmark E220

Lexmark E220
89 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Clearing jams
41
Paper handling
If the jam occurs in the fuser:
1 Open the printer cover.
2 Remove the print cartridge (it may be warm).
Note: The photoconductor drum on the bottom of the print cartridge may be damaged if
it is exposed to light. Cover the cartridge or store it in a clean, dark place if you take
it out of the printer for an extended period of time.
3 Gently pull out the media.
CAUTION: Avoid touching the fuser; it may be hot!
4 If the media is jammed tightly behind the roller, or if you cannot get a grip on it, close the
cover, open the front output door, and pull out the paper.
5 Make sure there is no more media in the printer.
Photoconductor
drum
Fuser
Roller

Table of Contents

Other manuals for Lexmark E220

Related product manuals