Clearing jams
42
Paper handling
6 Reinstall the print cartridge.
7 Close the printer cover to resume printing.
A jam may occur if the top output bin is too full and the media is unable to exit the printer:
1 Remove the media from the top output bin.
2 Clear the jam.
If a jam occurs while printing labels from tray 1 or the manual feed:
1 Be sure the labels remain attached to the backing sheet after clearing the jam.
2 Before resuming label printing, load paper in tray 1.
3 Press the Continue button and print 10 or more menu settings pages.
The paper removes any remaining adhesive in or on the fuser.
Warning: Serious damage to your printer may occur if adhesive labels remain in the fuser.
See Calling for service.
If the jam occurs as the paper exits the optional 250-sheet tray into the printer:
1 Open the printer cover.
2 Remove the print cartridge (the cartridge may be warm).
To Next Page
Loading...
