Understanding the operator panel lights
50
Understanding the operator panel lights
What this light sequence means:
The printer is ready to receive and process data. In
addition, the toner in the print cartridge is getting low.
What you can do:
• Send a print job.
• Press and release
Continue to print the menu
settings page for a list of current printer
settings.
• Remove the print cartridge and shake it to
extend the life of the cartridge. If you do not
have a replacement cartridge, order one now.
• Replace the print cartridge.
• Press and hold
Cancel to reset the printer.
Note: The Toner Low light does not come
on if the 1,500-page starter print
cartridge is installed.
What this light sequence means:
The printer is not ready to receive or process data, or
the printer ports are offline.
What you can do:
• Press and release
Continue to return to the
Ready or Busy state.
• Press and release
Cancel to cancel the print job.
• Press and hold
Cancel to reset the printer.
Error
Paper Jam
Load Paper
Toner Low
Ready/Data
Continue
Cancel
Press Continue
Error
Paper Jam
Load Paper
Toner Low
Ready/Data
Continue
Cancel
Press Continue
To Next Page
Loading...
