Understanding the operator panel lights
49
Understanding the operator panel lights
Jam occurs
as it exits the
tray into the
printer
Page 41,
Page 42,
Clearing jams
Jam occurs
as a printed
job exits the
tray
Page 42,
Clearing jams
What this light sequence means:
• The printer is ready to receive and process
data.
• The printer is in Power Saver mode.
What you can do:
• Send a print job.
• Press and release
Continue to print the menu
settings pages for a list of current printer
settings.
• Press and hold
Cancel to reset the printer.
Note: If you want to change the Power
Saver setting, it can only be set from
the Local Printer Setup Utility (see
Using the Local Printer Setup
Utility).
Secondary error code light sequences for jams
Ready/
Data
Toner
Low
Load
Paper
Paper
Jam
Error
Press
Continue
Printer
condition:
Go to:
To Next Page
Loading...
