Understanding the operator panel lights
53
Understanding the operator panel lights
What you can do:
• Printing a directory, a font list, menu settings
pages, or Print Quality Test Pages:
– Press and release Cancel to cancel printing.
– Press and hold
Cancel to reset the printer.
• Receiving/processing data from a host
interface:
– Wait for the message to clear.
– Press and release
Cancel to stop processing.
– Press and hold
Cancel to reset the printer.
What this light sequence means:
The printer is busy receiving or processing data, or
printing a test page. In addition, the toner in the print
cartridge is getting low.
What you can do:
• Remove the print cartridge and shake it to
extend the life of the cartridge. If you do not
have a replacement cartridge, order one now.
• Replace the print cartridge.
• Press and release
Cancel to cancel the print job.
• Press and hold
Cancel to reset the printer.
Note: The Toner Low light does not come
on if the 1,500-page starter print
cartridge is installed.
Error
Paper Jam
Load Paper
Toner Low
Ready/Data
Continue
Cancel
Press Continue
Press Continue
Error
Paper Jam
Load Paper
Toner Low
Ready/Data
Continue
Cancel
To Next Page
Loading...
