Understanding the operator panel lights
54
Understanding the operator panel lights
What this light sequence means:
The printer is waiting until a print timeout occurs, or
until it receives additional data.
What you can do:
• Press and release
Cancel to cancel the print job.
• Press and release
Continue to print the contents
of the print buffer.
• Press and hold
Cancel to reset the printer.
What this light sequence means:
The printer is waiting until a print timeout occurs, or
until it receives additional data. In addition, the toner in
the print cartridge is getting low.
What you can do:
• Remove the print cartridge and shake it to
extend the life of the cartridge. If you do not
have a replacement cartridge, order one now.
• Replace the print cartridge.
• Press and release
Continue to print the contents
of the print buffer.
• Press and release
Cancel to cancel the print job.
• Press and hold
Cancel to reset the printer.
Note: The Toner Low light does not come
on if the 1,500-page starter print
cartridge is installed.
Error
Paper Jam
Load Paper
Toner Low
Ready/Data
Continue
Cancel
Press Continue
Error
Paper Jam
Load Paper
Toner Low
Ready/Data
Continue
Cancel
Press Continue
To Next Page
Loading...
