Understanding the operator panel lights
55
Understanding the operator panel lights
What this light sequence means:
• The printer is flushing corrupted print data.
• The printer is processing data or printing pages,
but the resolution of a page in the current print
job is reduced from 600 dots per inch (dpi) to
300 dpi in order to prevent a memory full error.
What you can do:
• Wait until the operator panel returns to Ready/
Data to print other jobs.
• Press and release
Cancel to cancel the print job.
• Press and hold
Cancel to reset the printer.
What this light sequence means:
The printer is flushing corrupted print data. In addition,
the toner in the print cartridge is getting low.
What you can do:
• Wait until the operator panel returns to Ready/
Data to print other jobs.
• Remove the print cartridge and shake it to
extend the life of the cartridge. If you do not
have a replacement cartridge, order one now.
• Replace the print cartridge.
Note: The Toner Low light does not come
on if the 1,500-page starter print
cartridge is installed.
Error
Paper Jam
Load Paper
Toner Low
Ready/Data
Continue
Cancel
Press Continue
Error
Paper Jam
Load Paper
Toner Low
Ready/Data
Continue
Cancel
Press Continue
To Next Page
Loading...
