Understanding the operator panel lights
63
Understanding the operator panel lights
Secondary error code
What you can do:
• Press and release
Continue to clear the message
and continue printing the job (the job may not
print correctly.)
• Press and release
Cancel to cancel the print job.
• Press and hold
Cancel to reset the printer.
• To avoid this error in the future:
– Simplify the print job. Reduce the complexity of
the page by reducing the amount of text or
graphics on the page and deleting unnecessary
downloaded fonts or macros.
– Install additional printer memory (refer to the
Setup Guide for instructions).
Secondary error code
What this light sequence means:
The printer is processing data, but the memory used to
store pages is full.
What you can do:
• Press and release
Continue to clear the message
and continue printing the job (the job may not
print correctly).
• Press and release
Cancel to cancel the print job.
• Press and hold
Cancel to reset the printer.
• To avoid this error in the future:
– Simplify the print job. Reduce the complexity of
the page by reducing the amount of text or
graphics on the page and deleting unnecessary
downloaded fonts or macros.
– Install additional printer memory (refer to the
Setup Guide for instructions).
Error
Paper Jam
Load Paper
Toner Low
Ready/Data
Continue
Cancel
Press Continue
Error
Paper Jam
Load Paper
Toner Low
Ready/Data
Continue
Cancel
Press Continue
To Next Page
Loading...
