Lexmark E220

Understanding the operator panel lights
64
Understanding the operator panel lights
Secondary error code
What this light sequence means:
The page may not print correctly because the print
information on the page is too complex.
What you can do:
• Press and release
Continue to clear the
message and continue processing the print job
(some of the print data may be lost).
• To avoid this error in the future:
– Reduce the complexity of the page by reducing
the amount of text or graphics on the page and
deleting unnecessary downloaded fonts or
macros.
–Set Page Protect to On in the Local Printer
Setup Utility.
– Install additional printer memory (refer to the
Setup Guide for instructions).
Secondary error code
What this light sequence means:
The paper length is too short to print the formatted
data. This occurs when the printer does not know the
media size loaded in the tray, or there is a problem
feeding the media.
What you can do:
• Make sure the print media you loaded is large
enough.
• Open the printer cover, clear the paper path
and close the cover to resume printing (see
Clearing jams).
• Press and release
Continue to clear the message
and continue printing the job.
• Press and release
Cancel to cancel the print job.
Error
Paper Jam
Load Paper
Toner Low
Ready/Data
Continue
Cancel
Press Continue
Error
Paper Jam
Load Paper
Toner Low
Ready/Data
Continue
Cancel
Press Continue