Lexmark E220

Understanding the operator panel lights
65
Understanding the operator panel lights
Secondary error code
What this light sequence means:
The printer has received a request for a PPDS font
which is not installed.
What you can do:
• Press and release
Cancel to cancel the print job.
• Press and hold
Cancel to reset the printer.
• Press and release
Continue to clear the
message and continue printing.
Secondary error code
What this light sequence means:
The printer does not have enough memory to save the
data in the buffer.
What you can do:
• Install additional memory (refer to the Setup
Guide for instructions).
• Press and release
Continue to continue printing
the job.
• Press and release
Cancel to cancel the print job.
Error
Paper Jam
Load Paper
Toner Low
Ready/Data
Continue
Cancel
Press Continue
Error
Paper Jam
Load Paper
Toner Low
Ready/Data
Continue
Cancel
Press Continue