Replace photoconductor
- Blinking
- Blinking
- On
When you first receive either light sequence, you should immediately order a new photoconductor kit. While the
printer may continue to function properly after the photoconductor kit has reached its official end-of-life, print quality
significantly decreases.
Note: The photoconductor kit is one item only.
To replace the photoconductor kit:
1 Turn the printer off.
2 Pull the photoconductor kit and toner cartridge together as a unit out of the printer by pulling on the toner
cartridge handle.
Note: The photoconductor kit and toner cartridge form a unit.
Maintaining the printer
88
To Next Page
Loading...
