Printer is printing solid black pages
Action Yes No
Step 1
a Reinstall the imaging unit.
1 Remove the toner cartridge, and then the imaging unit.
Warning—Potential Damage: Do not expose the imaging unit to
direct light for more than 10 minutes. Extended exposure to
light may cause print quality problems.
2 Install the imaging unit, and then the cartridge.
b Resend the print job.
Is the printer printing solid black pages?
Go to step 2. The problem is solved.
Step 2
Replace the imaging unit, and then resend the print job.
Is the printer printing solid black pages?
Contact
customer
support.
The problem is solved.
Transparency print quality is poor
Action Yes No
Step 1
From the Paper Menu, set the paper type to match the paper loaded in
the tray. To access the Paper Menu, do either of the following:
• If the printer is on a network, then open a Web browser and type the
printer IP address in the address field. Then navigate to Settings >
Paper Menu.
Note: If you do not know the IP address of the printer, then print a
network setup page and locate the IP address in the TCP/IP section.
• If the printer is connected to a computer by a USB or parallel cable,
then open the Local Printer Settings Utility for Windows or Printer
Settings for Macintosh.
Is the paper type for the tray set to Transparency?
Go to step 2. Set the paper type to
Transparency.
Troubleshooting 179
To Next Page
Loading...
Need help?
General
