Lexmark MS310 User Manual

Clearing jams
Carefully select paper and specialty media and load them properly to avoid most jams. For more information, see
“Avoiding jams” on page 90. If jams do occur, then follow the steps outlined in this chapter.
Note: Jam recovery is set to Auto by default. The printer reprints jammed pages unless the memory required to hold
the pages is needed for other printer tasks.
Avoiding jams
Load paper properly
• Make sure paper lies flat in the tray.
Correct loading of paper Incorrect loading of paper
• Do not remove a tray while the printer is printing.
• Do not load a tray while the printer is printing. Load it before printing, or wait for a prompt to load it.
• Do not load too much paper. Make sure the stack height is below the maximum paper fill indicator.
Clearing jams 90

Lexmark MS310 Specifications

General

Print Technology	Monochrome Laser
Print Speed (Black)	Up to 35 ppm
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 50, 000 pages
Standard Memory	128 MB
Processor Speed	800 MHz
Paper Input Capacity	250 sheets
Operating Systems Supported	Windows, Mac, Linux
Connectivity	Ethernet
Maximum Paper Capacity	850 sheets