Lexmark MS310 User Manual

• Do not slide the paper into the tray. Load paper as shown in the illustration.
• Make sure the guides in the tray or the multipurpose feeder are properly positioned and are not pressing tightly
against the paper or envelopes.
• Push the tray firmly into the printer after loading paper.
Use recommended paper
• Use only recommended paper or specialty media.
• Do not load wrinkled, creased, damp, bent, or curled paper.
• Flex, fan, and straighten paper before loading it.
• Do not use paper that has been cut or trimmed by hand.
• Do not mix paper sizes, weights, or types in the same tray.
• Make sure the paper size and type are set correctly on the Embedded Web Server or the computer.
Note: Depending on your operating system, access the Paper menu using Local Printer Settings Utility or Printer
Settings.
• Store paper according to manufacturer recommendations.
Accessing jam areas
Open the doors and pull out the trays to access jam areas.
Clearing jams 91

Lexmark MS310 Specifications

General

Print Technology	Monochrome Laser
Print Speed (Black)	Up to 35 ppm
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 50, 000 pages
Standard Memory	128 MB
Processor Speed	800 MHz
Paper Input Capacity	250 sheets
Operating Systems Supported	Windows, Mac, Linux
Connectivity	Ethernet
Maximum Paper Capacity	850 sheets