Toner specks appear on prints
Action Yes No
Replace the imaging unit, and then resend the print job.
Do toner specks appear on prints?
Contact
customer
support.
The problem is solved.
Toner rubs off
Leading edge
Trailing edge
ABC
DEF
Action Yes No
Step 1
From the Paper Menu, check the paper type and weight settings. To access
the Paper Menu, do either of the following:
• If the printer is on a network, then open a Web browser and type the
printer IP address in the address field. Then navigate to Settings >
Paper Menu.
Note: If you do not know the IP address of the printer, then print a
network setup page and locate the IP address in the TCP/IP section.
• If the printer is connected to a computer by a USB or parallel cable,
then open the Local Printer Settings Utility for Windows or Printer
Settings for Macintosh.
Do the paper type and weight settings match the type and weight of paper
loaded in the tray?
Go to step 2. Change the paper type
and weight settings to
match the paper
loaded in the tray.
Step 2
Check if you are printing on paper with texture or rough finishes.
Are you printing on textured or rough paper?
Change the texture
settings in the Paper
menu.
Contact
customer
support at
http://support.lexmar
k.com or your service
representative.
Uneven print density
ABCDE
ABCDE
ABCDE
Troubleshooting 185
To Next Page
Loading...
