Lexmark MS310

a Pull the multipurpose feeder extender.
b Pull the extender gently so the multipurpose feeder is fully extended and open.
2 Squeeze the tab on the left width guide, and then move the guides for the paper you are loading.
2
1
3 Prepare the paper or specialty media for loading.
• Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten
the edges on a level surface.
• Hold transparencies by the edges. Flex the stack of transparencies back and forth to loosen them, and then fan
them. Straighten the edges on a level surface.
Note: Avoid touching the printable side of the transparencies. Be careful not to scratch them.
Loading paper and specialty media 35