EasyManua.ls Logo

Lexmark MS810 - Page 264

Lexmark MS810
364 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
When Jam Recovery is set to On or Auto, the printer reprints jammed pages. However, the Auto setting reprints
jammed pages if adequate printer memory is available.
2
3
4
5
6
7
8
9
11
1
10
Jam location Printer message What to do
1 Staple finisher [x]page jam, remove paper, open
stapler door. Leave paper in bin. [455–
457]
Remove paper from the stapler bin, open the stapler
door, then remove the staple cartridge, and then
remove the jammed staples.
2 Standard bin [x]page jam, remove standard bin
jam. [203]
Remove jammed paper from the standard bin.
3 Inside the printer [x]page jam, lift front cover to remove
cartridge. [200–201]
Open the front cover and the multipurpose feeder,
then remove the toner cartridge and the imaging unit,
and then remove the jammed paper.
4 Multipurpose feeder [x]page jam, clear manual
feeder. [250]
Remove all paper from the multipurpose feeder, and
then remove the jammed paper.
5 Duplex area [x]page jam, remove tray 1 to clear
duplex. [235–239]
Pull out tray 1 completely, then push the front duplex
flap down, and then remove the jammed paper.
6 Trays [x]page jam, open tray [x]. [24x] Pull out the indicated tray, and then remove the
jammed paper.
Clearing jams 264

Table of Contents

Other manuals for Lexmark MS810

Related product manuals