d Squeeze the length guide and slide it to the correct position for the size of the paper being loaded until it clicks
into place.
3 Flex the sheets back and forth to loosen them. Do not fold or crease the paper. Straighten the edges on a level
surface.
4 Load the paper stack with the printable side facedown.
Note: Make sure the paper is loaded properly.
• There are different ways for loading letterhead depending on whether an optional staple finisher is installed or
not.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 59
To Next Page
Loading...
